ELS-7100-310628 -ADAMS RITE ELECTRIC LOCK  RELEASE 12VDC View larger

ELS-7100-310628 -ADAMS RITE ELECTRIC LOCK RELEASE 12VDC

ADAMS RITE ANSI MORTICE ELECTRIC LOCK RELEASE - FAIL SECURE - 12VDC

£ 149.99 VAT excl.

£ 179.99 VAT incl.

ELS-7100-310628 -  ADAMS RITE ELECTRIC LOCK RELEASE 12VDC

 

ADAMS RITE ANSI MORTICE ELECTRIC LOCK RELEASE - FAIL SECURE - 12VDC

FOR USE ON ALUMINUIM SINGLE LEAF DOORS,NON-HANDED,CAN BE SET TO FAIL SAFE OR FAIL SECURE(DC REQUIRED FOR FAIL-SAFE)

907 KG (2000LBS)HOLDING FORCE

The Adams Rite 7100 Series is for remote use access control of any door equipped with Adams Rite 4700 series (or similar) deadlatch.

The 7100 has flat faceplates for installing in the frame of a single action single leaf doors.

Specification

  • Suitable for use on aluminium doors
  • Facility to change duty from fail-safe to fail secure and vice-versa
  • Non-handed
  • The compact mechanism fits into an aluminium jamb section as shallow as 44.45mm
  • Electrical actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without operating the latch itself
     
  • The 7100 series have flat faceplates for mounting in the frame of a single action single leaf doors.
  • 907kg holding force (2000lbs)
  • Round corners of faceplate to aid installation into aluminium doors 
  • 3 year guarantee

7100_ElectricStrike_HI.jpg&ft=.jpg&mh=427100.jpg&ft=.jpg&mh=420&mw=1020

Current Draw: 12vAC=1.48A, 12vDC=0.332A,
24vAC=0.74A, 24vDC=0.19A (nominal).
DC intermittent and continuous units are silent,
AC intermittent units "buzz" on operation
Voltage Tolerance: ±10%.
Powered by: Internal solenoid
Monitoring: (Optional) Single: Latch only, Double: Latch & solenoid.
Duty: Fail-safe or fail-secure (convertible without additional parts). DC power supply required for fail-safe operation.
Jaw Strength: 907kg (2000lbs).
Case: 85.6mm x 28.6mm x 41.6mm. Zinc aluminium alloy.
Mechanism: Stainless steel internal blocking mechanism
Strike Opening: 36.5mm x 15.9mm x 12.7mm. Stainless steel bolt retainer jaw.
Door gap: Minimum 3mm (1⁄8"), operational door gap 3-5mm.
Faceplate: Aluminium. 123.7mm x 31.8mm. Flat.
Finishes: Satin Anodised Aluminium
Subcover: Basic subcover lip will suit a 44.45mm (1 3⁄4") thick door that closes flush with jamb edge.For extended bolt-on subcovers see ordering codes.
Standards: ANSI/BHMA 156.5 Grade 1. UL Listed for burglary resistance.

PLEASE SEE ORDERING OPTIONS ON PRODUCT INFORMATION PAGE  OR  CALL FOR ADVICE

Accessories