400 Series Electrical Latch Retraction Touch Bar

Available with a single latch, two point vertical Pullman catches or three point horizontal latches in a standard Silver or Satin Chrome finish making the range ideal for almost any final exit door.
To compliment the range a complete Access Control package is available containing the APX16 IP65 rated Key Pad, a 1 amp PSU and concealed door loop .To order Access Control Kit Please see above left you may also need
The APX16 Keypad for access from the outside of the door is IP65 rated which means it can be installed in the most extreme of environments as the wiring has total protection against the ingress of dust and the unit is protected against long periods of immersion under pressure.
The strong Zinc Alloy Electroplated case also offers a reasonable amount of protection against vandalism.

Please see product information tab above for more detailed product and installation information.

Features & Benefits – Touch Bar
• Tested and certified to EN1125
(Classification Code 3-7-7-B-1-4-2-2-B-A)
• Fire tested to EN1634-1
• Available with a micro-switch contained in
the operating mechanism
• Available with hold-back facility
• Operates on 12 – 30v dc 12 – 20v ac with 1
amp PSU
• Standard size touch bar is 840mm which is
suitable for doors up to 860mm wide.
Additional wide units 1170mm and 1300mm
are available on request
• Strikers are available for PVC-U, Aluminium
and Steel Doors
• Manual Outside Access Device fitted with a
Euro Single Cylinder can be used as an
alternative to the Electrical Keypad
Please note these are not standard stock and are special order items please check before ordering