AEN1060 Proximity Reader (Entra+Securefast)
The INNOPROX II Slimline card reader is a stylish, robust reader with a strong, impact resistant polycarbonate enclosure which can
withstand harsh environments.
The Weigand output interfaces with most existing protocol access control systems. The integral ARDREX function allows 2 readers to be connected together on one reader cable for ‘IN’ & ‘OUT’ operation when used with
Securefast Entra+ controllers.
LED & Buzzer Functions
When a card or fob is presented to the reader,the red LED flashes green and gives a short beep. The multicolour LED and beeper are controlled by the host system. When the BUZZ function is enabled, a built-in 2 second timer
allows the buzzer to be used with ‘Free Access Doors’ without the buzzer continuously sounding.
On reader power-up, an internal self test routine checks which verifies the setup configuration and determines the internal or external control of the LED and beeper. Reader operation is then started.
Recognises card formats up to 90 bits long with unique ID’s. XTEA encryption keys provide over
18 billion billion differs.A tamper alarm output is provided in case of vandalism.
Many card types and output formats are available – details are available on request please email firstname.lastname@example.org. Outputs are diode protected.
To Purchase fobs or Cards please see you may also need above left
EN60950 and IEC6095 – 0 ITE Electrical Safety
ETS 300 683 – EMC CE Mark
Read Range • ISO card – 45mm
• Keyfob – 32mm
Dimensions 104mm (H) x 52mm (W) x 19mm (D)
Material High Quality Polycarbonate UL 94
Power Supply 7 – 25 VDC reverse polarity protected
Average 13mA, Peak 20mA @13.8V DC
Operating Temperature -30⁰ to +65⁰ C
Operating Humidity 0-95% relative humidity noncondensing
Transmit Frequency 125kHz
Outputs • Wiegand data 0 & data 1 100uS pulses @1ms bit rate
• Magnetic Stripe 200uS clock width with 400uS data bits
• Type and format automatically selected by card in use
• RS485 selected by wire link
• Tamper alarm (70MA max)
Connection 40cm Cable Pigtail
Cable Distance • Wiegand or Clock-and-Data interface – 200m
• Recommended cable is Belden 9535 or equivalent
(5 core with overall shield)
AEN1060 Proximity Reader